Reviews & Guides · Creative Tools
Bambu Lab P1S extruder jam: owner repair walkthrough for P1S buyers
I fixed my Bambu Lab P1S extrusion jam by clearing the filament path, cleaning the drive gear and testing the hot end step by step.
3D printers
Print quality, setup, materials and maintenance.
Reviews & guides
9 articles
Reviews & Guides · Creative Tools
Bambu Lab P1S: a first-week owner guide to printed accessories
I spent a week with the Bambu Lab P1S and mapped out useful printed accessories, including a waste bin, scraper and exhaust adapter, plus installation cautions.
Reviews & Guides · Creative Tools
Bambu Lab P1S Combo: planning my first 48 hours of prints
I mapped out 48 hours of starter prints for my Bambu Lab P1S, from a scraper and waste bin to AMS protection, risers and a first figurine.
Reviews & Guides · Creative Tools
Bambu Lab A1 Combo: Two Months of Easy Multicolor 3D Printing
I used the Bambu Lab A1 Combo for two months: four-color printing was easy to start, detailed, and convenient, though it wasted some filament.
Reviews & Guides · Creative Tools
Bambu Lab A1: First-Week Precision and Easy Setup
I used the Bambu Lab A1 for a week: unboxing to first power-on took under 15 minutes, a small standard-speed print took 2–3 hours, and Fast mode traded smoother surfaces for speed.
Reviews & Guides · Creative Tools
Bambu Lab A1: One Week of Easy Setup, a Good Benchy Print and Fan Noise
After about 30 minutes of calibration, I could print a good Benchy on the Bambu Lab A1, but taller parts showed layer lines and the cooling fan could get loud.
Reviews & Guides · Creative Tools
Bambu Lab A1: Colourful Prints, Stubborn Removal and Optional AMS
I found the Bambu Lab A1 genuinely fun for colourful prints, but removing stuck parts remained difficult even after I tried a low-temperature build plate.
Reviews & Guides · Creative Tools
Bambu Lab A1: smooth silk-PLA lamp print after just over two hours
I printed a large, twisted silk-PLA lamp on the Bambu Lab A1 in just over two hours and found its curved surfaces smoother than expected.
Reviews & Guides · Creative Tools
Bambu Lab A1: Six Months of PLA and PETG 3D Printing
I used a Bambu Lab A1 for six months and more than 50 filament rolls; damp PETG caused stringing, and I later inspected a loose hotend screw after hearing noise.