Reviews & Guides · Computing & Networking
eero 7: a 2Gbps fibre test before ordering eero Pro 7
I tested eero 7 on a new 2Gbps fibre line and saw 1.2Gbps wired but 470Mbps Wi-Fi before returning it; I later ordered eero Pro 7.
Routers & mesh Wi-Fi
Home coverage, wired backhaul and network reliability.
Reviews & guides
16 articles
Reviews & Guides · Computing & Networking
eero Pro 7: Four-node mesh owner review with ad blocking
I replaced my eero Max 7 with four eero Pro 7 units and found ad blocking worked across phone browsing and Samsung Tizen, though not every YouTube ad.
Reviews & Guides · Computing & Networking
NETGEAR Orbi RBR850: 800+ Mbps at home after replacing Nighthawk RAX120
I replaced my NETGEAR RAX120 with a three-node Orbi 850 system and saw over 800 Mbps throughout my home, including about 900 Mbps in the living room.
Reviews & Guides · Computing & Networking
TP-Link Archer BE550 Pro: Japan IPoE and MLO notes, with Archer BE550 buying context
I bought the Japanese TP-Link Archer BE550 Pro for 10Gbps fiber, but severe MLO latency and recurring IPv6 drops led me to use OpenWrt for routing.
Reviews & Guides · Computing & Networking
TP-Link Deco M4: a four-floor wired-backhaul setup
I used TP-Link Deco M4 units across four floors with Ethernet backhaul, then found my upstairs computer needed an extra switch to get a wired connection.
Reviews & Guides · Computing & Networking
TP-Link Deco X50 Pro: fixing weak upstairs Wi-Fi in a Canadian home
I used a TP-Link Deco X50 Pro mesh system to fix weak upstairs Wi-Fi from a garage router after a cheap extender failed; setup was simple.
Reviews & Guides · Computing & Networking
TP-Link Deco X55: a three-floor installation reached about 400 Mbps upstairs
I installed three TP-Link Deco X55 units for a friend and found setup took about 10 minutes, with roughly 400 Mbps still available on the top floor.
Reviews & Guides · Computing & Networking
TP-Link Deco BE9300 Japanese version: first-use notes for Deco BE65 and Deco BE63 buyers
I connected the Japanese TP-Link Deco BE9300 before the holiday and found its wireless speed surprisingly higher than wired, while 6 GHz connected at the stated width.
Reviews & Guides · Computing & Networking
NETGEAR Orbi 750 RBR750: KPN and VLAN 6 setup notes for Orbi 770 buyers
I bought an Orbi 750 for attic Wi-Fi, then couldn't get online with KPN. In my setup, changing the PPPoE and VLAN settings finally got it connected.
Reviews & Guides · Computing & Networking
NETGEAR Orbi 770 Series: Wi-Fi after a 2,000 Mbps broadband upgrade
I switched to the NETGEAR Orbi 770 after upgrading to 2,000 Mbps broadband. I'm happy with my iPhone Air speed test and the stability of my smart-home devices.
Reviews & Guides · Computing & Networking
NETGEAR Orbi RBK852: PlayStation Portal latency notes for Orbi 770 buyers
I tested PlayStation Portal over an Orbi RBK852 access point with my PS5 wired to the main router. This setup gave me latency of about 30 milliseconds.
Reviews & Guides · Computing & Networking
TP-Link TL-7DR7290: dual-WAN home-network notes for Archer BE550 buyers
I added a TP-Link TL-7DR7290 to my dual-WAN home network. It now does the heavy lifting in the living room, alongside two other routers and 2.5G links.
Reviews & Guides · Computing & Networking
TP-Link TL-7DR7290: teardown and bandwidth notes for Archer BE550 buyers
I took apart the TP-Link TL-7DR7290, then tested its four 2.5G ports on firmware 1.0.8. Simultaneous two-way traffic revealed their shared bandwidth limit.
Reviews & Guides · Computing & Networking
TP-Link Deco BE95: unboxing and a local Wi-Fi 7 speed test
I unboxed an imported TP-Link Deco BE95 and measured its 23 cm height. At six metres, my local test reached 2.9 Gbps down and 2.6 Gbps up.
Reviews & Guides · Computing & Networking
TP-Link Deco BE95: heat, a persistent yellow light and lost connectivity
My TP-Link Deco BE95 ran hot, then lost connectivity after one or two months. I came home to an offline hub and a yellow light that stayed on after restarting.
Reviews & Guides · Computing & Networking
TP-Link Deco Wi-Fi 7: Cat 6A rewiring notes for Deco BE95 buyers
I bought 50 metres of Cat 6A cable and rewired my Deco Wi-Fi 7 setup myself. Replacing the cable and terminating the sockets finally gave me a wired mesh.